TOWER CONVERSIONS

This web site was designed to be best viewed in 1280 x 1024

TOWER CONVERSIONS Page 3 of 3

CLICK HERE to go to Page 1..or..CLICK HERE to go to Page 2

**Click here** for the cables for the tower kit

Updated 30th April 1999

MOBI 's rule . . . . . . . . . .. Listing some of our services and stock items. . . . . Freelance Electronics & CAD Designer , Electronic Components , MP3 Player , MP3 Recorder , Barcode Readers , Barcode Scanners , Computer Parts , 44 way mini ide cables , Laptop Cables , Lap-link cables , Popular Diodes - IN4148 , 1N914 , 1N4004 , zener diodes , 5.1 zener , 6.2V zener , 7.5V zener , 9.1V zener , 12v zener , Power Diodes , 1N5404 , L.E.D.s , red leds , green leds , yellow leds , orange leds , white leds , blue leds , Popular Transistors , BC548 , BC547, BC337, BC338 , BC207, BC327, BF454 , 2N2222 , PH2369 , 2N3053 , 2N3638 , 2N3055 , TIP3055 , 2SD 1113 , 2SD1118 , 2SC4046 , 2SD3504 , 2SC2792 , 2SC2334 , 2SC458 , 2SC3331 , 2SC1959 , 2SB825 , 2SA844 , Popular Eproms 2532 , 2716 , 2732 , 2764 , 27C64 , 27128 , 27C128 , 27256 , 27C256 , 27512 , 27C 512 , Semiconductors, Supplier of "obsolete semiconductors", ICs, chips , integrated Circuits, Military Spec Components , many types of custom-made adapters , Scsi Cables, Scsi Adapters, SCSI Terminators, Funky connectors, electronics, Electronic Designers using digital electronics, surge protection, power spike reduction and protection, Mini IDE, ROMS, RAM, mini ide, Honda high-density SCSI cables, CD ROM burning software , Innovation , IDE cables , 44 way mini cable 2.5", monitors , ieee-1284 printer cables , uv eproms , tower case solutions , Many innovative circuits , 41256 RAM , 41464 RAM , 28 Pin EPROMS , C64 chips and parts , Logic Chips , video chips, amiga parts , 880K floppy disks , 880k disks , Mac disks, Anything for "ye olde" Amiga

Click Here to go to MAIN page.or.Click here for BOTTOM of page

The picture below shows the left side view of an almost completed A1200 "fully worked" "MACASE" Tower.
As mentioned in Page 1, these special tower cases are selected for use in these projects,for their robustness and the "very high quality" of finish, these are not your average el-cheapo tower case, far from it!. We only use MACASE tower cases
They are strong, rigid and a thicker gauge of plated steel, you can virtually stand on them or "party on the roof " !....
As stated in page 1 each tower comes with 250 watt power supply (300 Watts is available as an optional extra) all assembly screws, an attractive and neat plinth to mount the tower onto.
This unit shown here has mini 2.5" hard drive fitted, and the PPC that is fitted can be seen at the top.
The basic price for an empty tower such as shown here (minus items fitted) is $280. including 22.5% Australian Government sales tax.
We manufacture and supply all the required extension cables to install an AMIGA A1200 into this case.
These can be purchased as a kit form, where you supply the know-how and labour (and save some dollars).

To facilitate the passage of data etc. to the outside world you will require most of the below items.

These consist of the following carefully hand assembled tower items:


Internal Amiga Compatible Floppy drive 34 way cable and two connectors.........$8.50

Mouse extension cable DB9 female to DB9 male...................................$7.50

Joystick extension cable DB9 female to DB9 male................................$7.50

Floppy drive port extension cable DB23 male to DB23 female with specially 

 added with reinforced bracket.................................................$29.00

Serial port extension cable DB25 female to DB25 male IDC.......................$25.00

Parallel port extension cable DB25 male to DB25 female IDC.....................$25.00

Stereo 2 x RCA male connections and shielded cables going to mounting plate
 
 with female RCA fittings drilled and mounted and soldered.....................$25.00

R.G.B. port extension cable DB23 female to DB23 male with specially added 

 with reinforced bracket........................................................$32.00

UHF TV R.F.output and CVBS Video RCA male connections and shielded cables
 
goes to mounting plate with fem RCA fittings drilled and mounted and soldered...$25.00

Square DIN Power connector with wire to special connection to the 250 watt 

power supply (as to not void warranty)Specially made to suit the PSU............$29.00
 
Custom Hand made Mounting plate to suit A1200 and this tower chassis cut to

 size, notched out and tabs bent to shape drilled  and ready to screw together..$65.00

Total price (excluding case and options below) of cable hardware above

 for the tower is..............................................................$278.50
 Prices include 22.5% Australian Government sales tax

ADDITIONAL OPTIONS

Extra power (12V & 5 Volt) cables Male and two female connectors................$7.50

Custom Manufactured Dual Kickstart Rom "riser assembly" for A1200 to accommodate other add-on
 
peripherals  such as the  MELODY Ž or PORT PLUS Ž and the IDE Controllers......$125.00


Custom made insulated Blizzard PPC "upper" Holding Brackets (1 pair)............$25.00

300 Watts option add extra......................................................$45.00


sales@unitechelectronics.com 



UNITECH ELECTRONICS PTY. LTD WAS THE AUTHORISED AUSTRALASIAN DISTRIBUTOR OF ASIMWARE PRODUCTS

Click here for TOP of page





Copyright Š 1989 - 2007 Unitech Electronics Pty. Ltd. Established July 1978.
                

 Back to the Main Page