TOWER CONVERSIONS Page 2 of 3
CLICK HERE to go to Page 1..or..CLICK HERE to go to Page 3
**Click here** for the cables for the tower kit
CLICK HERE to go back to previous page
Updated 30th April 1999
Click Here to go to MAIN page.or.Click here for BOTTOM of page
The picture below shows the left side view and part of a rear view of an almost completed A1200 "fully worked" tower.
As mentioned in Page 1,these special tower cases are selected for use in these projects, for their robustness and the "very high quality" of finish, these are not your average el-cheapo tower case, far from it!.
They are strong, rigid and a thicker gauge of plated steel, you can virtually stand on them or "party on the roof " !....
As stated in page 1, each tower comes with 250 watt power supply (300 Watts is available as an optional extra) all assembly screws, an attractive and neat plinth to mount the tower onto.
This unit shown here has mini 2.5" hard drive fitted, and the PPC that is fitted can be seen at the top.
The basic price for an empty tower such as shown here (minus items fitted) is $280. including 22% Australian Goverment sales tax.
We manufacture and supply all the required extension cables to install an AMIGA A1200 into this case.
To facilitate the passage of data etc. to the outside world you will require most of the below items.
These consist of the following carefully hand assembled tower items:
- Internal Amiga Compatible Floppy drive 34 way cable and two connectors.........$8.50
- Mouse extension cable DB9 female to DB9 male...................................$7.50
- Joystick extension cable DB9 female to DB9 male................................$7.50
- Floppy drive port extension cable DB23 male to DB23 female with specially
added with reinforced bracket.................................................$29.00
- Serial port extension cable DB25 female to DB25 male IDC.......................$25.00
- Parallel port extension cable DB25 male to DB25 female IDC.....................$25.00
- Stereo 2 x RCA male connections and shielded cables going to mounting plate
with female RCA fittings drilled and mounted and soldered.....................$25.00
- R.G.B. port extension cable DB23 female to DB23 male with specially added
with reinforced bracket........................................................$32.00
- UHF TV R.F.output and CVBS Video RCA male connections and shielded cables
goes to mounting plate with fem RCA fittings drilled and mounted and soldered...$25.00
- Square DIN Power connector with wire to special connection to the 250 watt
power supply (as to not void warranty)Specially made to suit the PSU............$29.00
- Custom Hand made Mounting plate to suit A1200 and this tower chassis cut to
size, notched out and tabs bent to shape drilled and ready to screw together..$65.00
- Total price (excluding case and options below) of cable hardware above
for the tower is..............................................................$278.50
Prices include 22.5% Australian Government sales tax
ADDITIONAL OPTIONS
- Extra power (12V & 5 Volt) cables Male and two female connectors................$7.50
- Custom Manufactured Dual Kickstart Rom "riser assembly" for A1200 to accommodate other add-on
peripherals such as the MELODY ® or PORT PLUS ® and the IDE Controllers......$125.00
- Custom made insulated Blizzard PPC "upper" Holding Brackets (1 pair)............$25.00
- 300 Watts option add extra......................................................$45.00
sales@unitechelectronics.com
UNITECH ELECTRONICS PTY. LTD WAS THE AUTHORISED AUSTRALASIAN DISTRIBUTOR OF ASIMWARE PRODUCTS
Click here for TOP of page
Copyright © 1989 - 2007 Unitech Electronics Pty. Ltd. Established July 1978.
.Back to the Main Page