The basic price for an "empty" tower such as shown here (minus items fitted) is $280. including 22.5% Australian Government sales tax.
We only use Top of the range MACASE Towers , why ? ...Because they are the best in our opinion, they suit the application for fitting
of the weird "odd length" Amiga A1200 mother board with a Cyberstorm Accellerator fitted, logical thinking and metal work skills are required.
We manufacture and supply all the required extension cables to install an AMIGA A1200 into this case.
The tower can be purchased as a kit, where you supply the know-how and the labour (and save some $$$) or send us your A1200,
we disassemble it and fit it all within the tower, we supply it to you pre-configured, tested and ready to rock'n'roll !
We supply an fit the correct modifications to your Amiga A1200 Mother board to allow you to fit the A1200 mother board in your tower case.
This allows you to connect an A2000 or an A3000 keyboard to your existing A1200 Mother board .(other Amiga types all inquiries welcome)
More Tower ideas and details
We supply and fit the small circuit board as well as the addition of the 5 pin DIN , fully tested AUD$ 61.25
These consist of the following carefully hand assembled tower items:Internal Amiga Compatible Floppy drive 34 way cable and two connectors.........$8.50
Mouse extension cable DB9 female to DB9 male...................................$7.50
Joystick extension cable DB9 female to DB9 male................................$7.50
Floppy drive port extension cable DB23 male to DB23 female with specially
added with reinforced bracket.................................................$29.00Serial port extension cable DB25 female to DB25 male IDC.......................$25.00
Parallel port extension cable DB25 male to DB25 female IDC.....................$25.00
Stereo 2 x RCA male connections and shielded cables going to mounting plate
with female RCA fittings drilled and mounted and soldered.....................$25.00R.G.B. port extension cable DB23 female to DB23 male with specially added
with reinforced bracket.......................................................$32.00UHF TV R.F.output and CVBS Video RCA male connections and shielded cables
goes to mounting plate with fem RCA fittings drilled and mounted and soldered...$25.00Square DIN Power connector with wire to special connection to the 250 watt
power supply (as to not void warranty)Specially made to suit the PSU............$29.00Custom Hand made Mounting plate to suit A1200 and this tower chassis cut to
size, notched out and tabs bent to shape drilled and ready to screw together..$65.00Total price (excluding case and options below) of cable hardware above
for the tower is..............................................................$278.50Prices include 22.5% Australian Government sales tax
ADDITIONAL OPTIONS Extra power (12V & 5 Volt) cables Male and two female connectors................$7.50Custom Manufactured Dual Kickstart Rom "riser assembly" for A1200 to accommodate other add-on
peripherals such as the MELODY ® or PORT PLUS ® and the IDE Controllers......$125.00
Custom made insulated Blizzard PPC "upper" Holding Brackets (1 pair)............$25.00
300 Watts option add extra......................................................$45.00
sales@unitechelectronics.com UNITECH ELECTRONICS PTY. LTD "WAS" THE AUTHORISED AUSTRALASIAN DISTRIBUTOR OF ASIMWARE PRODUCTS Click here for TOP of page Copyright © 1999 Unitech Electronics Pty. Ltd. Sydney., Australia. Established 1978.
.Back to the Main Page
