You can add in a ram expansion card, with either 2, 4, 8, 16 or 32 MB of FAST RAM, or
add in an Accelerator card with FAST RAM, one or two ram simms of the same chips,
depending on which brand or Accelerator you wish to add-in, 68XXX - 030, 040 or 060
Another fine Optional extra - A Fast RAM expansion 2, 4, 8, 16 or 32MB , with or without an inbuilt accelerator - $call
Choose either Monitor, a 1084S Std or Microvitec multisync is an optional extra. 1084S from $ 399.00 inc GST.
The above system can easily be upgraded later with a neat IDE CD
ROM and IDE Software installed and setup ready to rock ' n ' roll !
Please note: Seriously, an A500 4.3 Amp power supply is required to successfully run the IDE CD ROM.
For power users however, the smart choice is a Power Tower rated at 200 watts, enough grunt? - absolutely !
Note: Do not use the Amiga  A1200  " styro "  light weight 3 Amp  power supply,  it is inadequate, also
don't use the sealed Amiga brick 3 Amp PSU, Problems: (1) It has service problems,  (2) We cannot fix it.
Also Note: The standard A1200 EC 020 " sealed resin brick " has poor output and if there is a problem,
we cannot chip away the resin to fix it, The " styrene " Switched mode P.S.U. is inadequate for this task.
Use your own A500 PSU or we stock refurbished A500 4.3 Amp Power supplies, including GST AUD$ 66.00
We also stock " NEW " ( easily serviceable ) A500 4.3 Amp Power supplies, including GST ........AUD$ 99.00