A1200 with 40x CD ROM running on a 200 W Power Tower PSU<

This web site was designed to be best viewed in 1280 x 1024 or wider using MOZILLA's FIREFOX A1200 running KS 3.1 and a 40 x Speed CD ROM on a 200 Watt Power Tower PSU by Unitech Electronics Pty. Ltd.

Phone: +61 2 9820 - 3555

sales@unitechelectronics.com

FAX: +61 2 9603 - 8685 Updated page style September 7th 2011

Take advantage of the huge benefits of shopping by credit card, safe, convenient and reliable.

Credit Card minimum order is AUD$ 20.00 USD$ 20.00 APPROX excluding freight and GST

Phone: ( local ) (02) 9820-3555

Phone: ( Int'nl ) + 61 2 9820-3555

FAX: ( local ) (02) 9603-8685 (24 Hrs)

FAX: ( Int'nl ) + 61 2 9 603-8685 (24 Hrs)

Business hours 10 - 5 Monday to Thursday, 10am - 4pm Fridays. E.S.T. Sydney, AUSTRALIA.

Please note , we no longer have any model of Amiga computers / monitors in stock as at June 1st 2004 There will be no further updates to the Amiga A1200 section on this web site - No Stock = No updates

The optional 1084 Monitor & Power Tower PSU for prices

This unit consists of the Famous OS 3.1 A1200 Magic pack,170 MB HD with a 40X Speed extnl
CD ROM connected via one of our world famous " grunty " A1200 200 watt Power Towers.

Price A1200 KS 3.1 (AUD$ 495.00) + Power Tower ( AUD$ 93.50 ) 40X Speed CD ROM ( AUD$ 95.70 ),
C.01234 mini IDE cable ( AUD$68.20 ) wired and ready to boogie......D.I.Y....... AUD$ 752.40 in GST

Assembled and hard drive prepped with CD ROM software and CD ROM mounted and setup...AUD$ 840.40 inc GST.

Updated January 28th 2001

ADD-ON O P T I O N S

You can add in a ram expansion card, with either 2, 4, 8, 16 or 32 MB of FAST RAM, or
add in an Accelerator card with FAST RAM, one or two ram simms of the same chips,
depending on which brand or Accelerator you wish to add-in, 68XXX - 030, 040 or 060

The above system can easily be upgraded later with a neat IDE CD
ROM and IDE Software installed and setup ready to rock ' n ' roll !

Please note: Seriously, an A500 power supply is required to successfully run the IDE CD ROM.
Note: Do not use the Amiga A1200 "styro" light weight 3 Amp power supply, it is inadequate, also
don't use the sealed Amiga brick 3 Amp PSU, problems (1) It has service problems, (2) We cannot fix it.

Also Note: The standard A1200 EC 020 " sealed resin brick " has poor output and if there is a problem,
we cannot chip away the resin to fix it, The " styrene " Switched mode P.S.U. is inadequate for this task.

Use your own A500 PSU or we stock refurbished A500 4.3 Amp Power supplies, including GST AUD$ 66.00
We also stock " NEW " ( easily serviceable ) A500 4.3 Amp Power supplies, including GST ........AUD$ 99.00

UNITECH ELECTRONICS PTY. LTD. is the AUTHORISED AUSTRALASIAN DISTRIBUTOR of ASIMWARE PRODUCTS

sales@unitechelectronics.com